Steps to Use Thermoplastic Road Marking Paint

1. Surface Preparation

Ensure the road surface is clean, dry, and free of dust, dirt, grease, or moisture for proper adhesion.
For old roads, remove any loose paint or debris.
If necessary, apply a primer to improve adhesion, especially on concrete surfaces.

2. Heating the Thermoplastic Paint

Use a preheater or thermoplastic melting kettle to heat the paint to around 180-200°C (356-392°F).
Stir continuously to maintain an even consistency and prevent burning.

3. Application of the Paint

Hand or Machine Application:
- Screed, Extrusion, or Spray Machine – For large road markings, use a specialized road marking machine.
- Hand-Pushed Applicator – Suitable for smaller projects or touch-ups.
Apply the molten thermoplastic evenly on the road surface at a thickness of 1.5 to 3 mm.

4. Adding Glass Beads

While the paint is still hot, sprinkle glass beads on top to enhance reflectivity.
Some thermoplastic paints contain pre-mixed glass beads, but additional beads may still be applied manually or automatically.

5. Cooling and Curing

The marking cools and hardens within 2-5 minutes, forming a durable and traffic-resistant layer.
Allow sufficient time for full curing before opening to traffic.

6. Quality Check

Inspect for proper thickness, adhesion, and reflectivity.
Remove excess material and touch up any defects.

Thermoplastic Road Marking Paint For Road Surfaces With Quick Hardening Time And Strong Adhesion 0

Technical Specification

Steps to Use Thermoplastic Road Marking Paint

1. Surface Preparation

Ensure the road surface is clean, dry, and free of dust, dirt, grease, or moisture for proper adhesion.
For old roads, remove any loose paint or debris.
If necessary, apply a primer to improve adhesion, especially on concrete surfaces.

2. Heating the Thermoplastic Paint

Use a preheater or thermoplastic melting kettle to heat the paint to around 180-200°C (356-392°F).
Stir continuously to maintain an even consistency and prevent burning.

3. Application of the Paint

Hand or Machine Application:
- Screed, Extrusion, or Spray Machine – For large road markings, use a specialized road marking machine.
- Hand-Pushed Applicator – Suitable for smaller projects or touch-ups.
Apply the molten thermoplastic evenly on the road surface at a thickness of 1.5 to 3 mm.

4. Adding Glass Beads

While the paint is still hot, sprinkle glass beads on top to enhance reflectivity.
Some thermoplastic paints contain pre-mixed glass beads, but additional beads may still be applied manually or automatically.

5. Cooling and Curing

The marking cools and hardens within 2-5 minutes, forming a durable and traffic-resistant layer.
Allow sufficient time for full curing before opening to traffic.

6. Quality Check

Inspect for proper thickness, adhesion, and reflectivity.
Remove excess material and touch up any defects.

Thermoplastic Road Marking Paint For Road Surfaces With Quick Hardening Time And Strong Adhesion 0

Technical Specification

MOQ:	1 ton
Price:	Pending
Standard Packaging:	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Delivery Period:	3-7work days
Payment Method:	L/C,T/T,Western Union
Supply Capacity:	100 tons per day

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

MOQ:	1 ton
Price:	Pending
Standard Packaging:	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Delivery Period:	3-7work days
Payment Method:	L/C,T/T,Western Union
Supply Capacity:	100 tons per day

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Thermoplastic Road Marking Paint

Thermoplastic Paint

JT/T280-2004

AASHTO M249

BS 3262

TCVN8791-2011

Road Marking Machine

Thermoplastic Kneader

Hand Push Thermoplastic Road Marking Machine

Cold Paint Road Marking Machine

Reflective Glass Beads

Two Component Road Marking Paint

Cold Road Marking Paint

Convex Mirror

Road Traffic Cone

Speed Bump

Road Stud

Other Traffic Safety Product

Thermoplastic Road Marking Paint For Road Surfaces With Quick Hardening Time And Strong Adhesion

Strong Adhesion Thermoplastic Road Marking Paint

Road Surfaces Thermoplastic Road Marking Paint

Quick Hardening Thermoplastic Road Marking Paint

Thermoplastic Road Marking Paint for Road Surfaces with Quick Hardening Time and Strong Adhesion

1. Surface Preparation

2. Heating the Thermoplastic Paint

3. Application of the Paint

4. Adding Glass Beads

5. Cooling and Curing

6. Quality Check

Thermoplastic Line Marking Paint,

Traffic Line Marking Paint,

Thermoplastic Road Marking Paint

Thermoplastic Paint

JT/T280-2004

AASHTO M249

BS 3262

TCVN8791-2011

Road Marking Machine

Thermoplastic Kneader

Hand Push Thermoplastic Road Marking Machine

Cold Paint Road Marking Machine

Reflective Glass Beads

Two Component Road Marking Paint

Cold Road Marking Paint

Convex Mirror

Road Traffic Cone

Speed Bump

Road Stud

Other Traffic Safety Product

Strong Adhesion Thermoplastic Road Marking Paint

Road Surfaces Thermoplastic Road Marking Paint

Quick Hardening Thermoplastic Road Marking Paint

Thermoplastic Road Marking Paint for Road Surfaces with Quick Hardening Time and Strong Adhesion

1. Surface Preparation

2. Heating the Thermoplastic Paint

3. Application of the Paint

4. Adding Glass Beads

5. Cooling and Curing

6. Quality Check

Thermoplastic Line Marking Paint,

Traffic Line Marking Paint,