Durability: Thermoplastic markings are engineered to withstand heavy traffic, extreme weather, and UV radiation, ensuring long-lasting visibility and reducing maintenance needs.
Reflectivity: The inclusion of glass beads provides high reflectivity, enhancing road safety by improving visibility during nighttime or low-light conditions.
Quick Drying: The paint cools and hardens rapidly after application, minimizing traffic disruptions

How To Apply The Thermoplastic Road Marking Paint

1. Surface Preparation

Clean the surface thoroughly to remove dust, dirt, grease, and loose debris.
If applying to asphalt or concrete, ensure it is dry and free from moisture.
For concrete surfaces, apply a primer to improve adhesion.

2. Heating the Paint

Use a preheater or hot melt kettle to heat the thermoplastic paint.
Stir continuously and heat it to 180–220°C (356–428°F) (check manufacturer recommendations).
Ensure the paint melts evenly and reaches a uniform consistency.

3. Application Process

Use a screed applicator or spray machine to apply the paint.
Apply the paint evenly, maintaining the desired thickness (usually 1.5–3 mm).
If adding reflective glass beads, apply them immediately before the paint cools.

4. Cooling & Drying

Allow the paint to cool and solidify (usually takes a few minutes).
The road can typically be opened to traffic within 5–10 minutes after application.

5. Maintenance & Precautions

Ensure proper ventilation if working in a confined area.
Wear protective gear (gloves, safety goggles, and heat-resistant clothing).
Regularly clean equipment to prevent blockages.

Good Adhesion Hot Melt Paint Fast Delivery High Quality Thermoplastic Road Marking Paint 0

Technical Specification

Durability: Thermoplastic markings are engineered to withstand heavy traffic, extreme weather, and UV radiation, ensuring long-lasting visibility and reducing maintenance needs.
Reflectivity: The inclusion of glass beads provides high reflectivity, enhancing road safety by improving visibility during nighttime or low-light conditions.
Quick Drying: The paint cools and hardens rapidly after application, minimizing traffic disruptions

How To Apply The Thermoplastic Road Marking Paint

1. Surface Preparation

Clean the surface thoroughly to remove dust, dirt, grease, and loose debris.
If applying to asphalt or concrete, ensure it is dry and free from moisture.
For concrete surfaces, apply a primer to improve adhesion.

2. Heating the Paint

Use a preheater or hot melt kettle to heat the thermoplastic paint.
Stir continuously and heat it to 180–220°C (356–428°F) (check manufacturer recommendations).
Ensure the paint melts evenly and reaches a uniform consistency.

3. Application Process

Use a screed applicator or spray machine to apply the paint.
Apply the paint evenly, maintaining the desired thickness (usually 1.5–3 mm).
If adding reflective glass beads, apply them immediately before the paint cools.

4. Cooling & Drying

Allow the paint to cool and solidify (usually takes a few minutes).
The road can typically be opened to traffic within 5–10 minutes after application.

5. Maintenance & Precautions

Ensure proper ventilation if working in a confined area.
Wear protective gear (gloves, safety goggles, and heat-resistant clothing).
Regularly clean equipment to prevent blockages.

Good Adhesion Hot Melt Paint Fast Delivery High Quality Thermoplastic Road Marking Paint 0

Technical Specification

MOQ:	1 ton
Price:	Pending
Standard Packaging:	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Delivery Period:	3-7work days
Payment Method:	L/C,T/T,Western Union
Supply Capacity:	100 tons per day

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

MOQ:	1 ton
Price:	Pending
Standard Packaging:	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Delivery Period:	3-7work days
Payment Method:	L/C,T/T,Western Union
Supply Capacity:	100 tons per day

Gravity(g/㎥)	2.1g/㎥
Color	Yellow, Orange, Red and etc.
Heating Temperature	180℃-220℃
Softening Point(℃)	110℃
Coating Appearance	No wrinkles, dots, blisters, cracks,fall-out&stick tyres
Drying Time(min)	Within 3 minutes
Chroma Performance	Reverse materials(white)
Compressive Strength(Mpa)	26
Abrasive Resistance(mg)	42
Alkali Resistance	Great (in saturated solution of calcium hydroxide for 24 hours
Glass Beads(%)	19%
Fluidity(s)	40s
Coating Resistance	Resis -10℃ for 4 hours
Package	25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons
Heat Resistance	Under 200℃-220℃ for hours
Material	C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on.
Application	Road marking, straight line, dotted line, curve, oriented arrow,letter and etc.
Water Resistance	Great (in water for 24 hours)

Thermoplastic Road Marking Paint

Thermoplastic Paint

JT/T280-2004

AASHTO M249

BS 3262

TCVN8791-2011

Road Marking Machine

Thermoplastic Kneader

Hand Push Thermoplastic Road Marking Machine

Cold Paint Road Marking Machine

Reflective Glass Beads

Two Component Road Marking Paint

Cold Road Marking Paint

Convex Mirror

Road Traffic Cone

Speed Bump

Road Stud

Other Traffic Safety Product

Good Adhesion Hot Melt Paint Fast Delivery High Quality Thermoplastic Road Marking Paint

High Quality Thermoplastic Road Marking Paint

Good Adhesion Thermoplastic Road Marking Paint

Fast Delivery Thermoplastic Road Marking Paint

Good Adhesion Hot Melt Paint Fast Delivery High Quality Thermoplastic Road Marking Paint

1. Surface Preparation

2. Heating the Paint

3. Application Process

4. Cooling & Drying

5. Maintenance & Precautions

Thermoplastic Line Marking Paint,

Traffic Line Marking Paint,

Thermoplastic Road Marking Paint

Thermoplastic Paint

JT/T280-2004

AASHTO M249

BS 3262

TCVN8791-2011

Road Marking Machine

Thermoplastic Kneader

Hand Push Thermoplastic Road Marking Machine

Cold Paint Road Marking Machine

Reflective Glass Beads

Two Component Road Marking Paint

Cold Road Marking Paint

Convex Mirror

Road Traffic Cone

Speed Bump

Road Stud

Other Traffic Safety Product

High Quality Thermoplastic Road Marking Paint

Good Adhesion Thermoplastic Road Marking Paint

Fast Delivery Thermoplastic Road Marking Paint

Good Adhesion Hot Melt Paint Fast Delivery High Quality Thermoplastic Road Marking Paint

1. Surface Preparation

2. Heating the Paint

3. Application Process

4. Cooling & Drying

5. Maintenance & Precautions

Thermoplastic Line Marking Paint,

Traffic Line Marking Paint,