Name: High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings
Brand: Guangdong Hua Qun Traffic Facilities Co., Ltd. By Shares
SKU: HQ-242
Price: 1.00 USD
Availability: InStock

Main Features of Thermoplastic Paint:
 
Composition: Made from synthetic resins, plasticizers, pigments, and glass beads for reflectivity.
Application: Applied at 200-220°C using specialized equipment, solidifies quickly upon cooling.
Durability: Lasts 3-5 years, resisting wear from traffic and weather.
Visibility: High reflectivity, especially at night, due to glass beads.
Versatility: Available in colors (white, yellow, etc.) for road lines, crosswalks, and symbols.
Adhesion: Bonds strongly to asphalt and concrete surfaces.
Skid Resistance: Provides good traction for vehicles and pedestrians.
Advantages of Thermoplastic Paint:
 
Long-Lasting: Reduces maintenance and reapplication frequency compared to regular paint.
Cost-Effective: Higher initial cost offset by extended lifespan, ideal for high-traffic areas.
Enhanced Safety: Superior visibility and skid resistance improve road safety.
Quick Application: Fast-drying, minimizing traffic disruptions.
Eco-Friendly Options: Low-VOC formulations available, reducing environmental impact.
Versatile Use: Suitable for highways, urban roads, parking lots, and airports.

How to Use Thermoplastic Road Marking Paint:
 
Prepare the Surface:
Clean the road (asphalt/concrete) to remove dirt, oil, and debris.
Ensure the surface is dry and free of moisture.
Fill cracks or repair damaged areas.
Prime (if Needed):
Apply a primer on concrete or worn asphalt for better adhesion, per manufacturer guidelines.
Mark the Layout:
Outline markings (lines, symbols, crosswalks) using chalk, tape, or stencils.
Heat the Thermoplastic:
Load thermoplastic material into a melting kettle or preheater.
Heat to 200-220°C, stirring for a uniform molten consistency.
Apply the Paint:
Small Areas: Use a handliner or screed box to pour and spread molten thermoplastic evenly (1.5-3 mm thick).
Large Areas: Use a road marking machine to extrude or spray the material.
Optionally, sprinkle glass beads on wet surface for reflectivity.
Cool and Set:
Allow 5-10 minutes for cooling and hardening, depending on weather.
Keep traffic off until fully set.
Inspect and Clean:
Verify thickness, adhesion, and alignment.
Remove stencils and clean equipment.
Tips:
Apply in dry, warm conditions (above 10°C).
Wear protective gear (gloves, masks) due to high temperatures.
Follow manufacturer instructions for equipment and material.

High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings 0

Technical Specification

Main Features of Thermoplastic Paint:
 
Composition: Made from synthetic resins, plasticizers, pigments, and glass beads for reflectivity.
Application: Applied at 200-220°C using specialized equipment, solidifies quickly upon cooling.
Durability: Lasts 3-5 years, resisting wear from traffic and weather.
Visibility: High reflectivity, especially at night, due to glass beads.
Versatility: Available in colors (white, yellow, etc.) for road lines, crosswalks, and symbols.
Adhesion: Bonds strongly to asphalt and concrete surfaces.
Skid Resistance: Provides good traction for vehicles and pedestrians.
Advantages of Thermoplastic Paint:
 
Long-Lasting: Reduces maintenance and reapplication frequency compared to regular paint.
Cost-Effective: Higher initial cost offset by extended lifespan, ideal for high-traffic areas.
Enhanced Safety: Superior visibility and skid resistance improve road safety.
Quick Application: Fast-drying, minimizing traffic disruptions.
Eco-Friendly Options: Low-VOC formulations available, reducing environmental impact.
Versatile Use: Suitable for highways, urban roads, parking lots, and airports.

How to Use Thermoplastic Road Marking Paint:
 
Prepare the Surface:
Clean the road (asphalt/concrete) to remove dirt, oil, and debris.
Ensure the surface is dry and free of moisture.
Fill cracks or repair damaged areas.
Prime (if Needed):
Apply a primer on concrete or worn asphalt for better adhesion, per manufacturer guidelines.
Mark the Layout:
Outline markings (lines, symbols, crosswalks) using chalk, tape, or stencils.
Heat the Thermoplastic:
Load thermoplastic material into a melting kettle or preheater.
Heat to 200-220°C, stirring for a uniform molten consistency.
Apply the Paint:
Small Areas: Use a handliner or screed box to pour and spread molten thermoplastic evenly (1.5-3 mm thick).
Large Areas: Use a road marking machine to extrude or spray the material.
Optionally, sprinkle glass beads on wet surface for reflectivity.
Cool and Set:
Allow 5-10 minutes for cooling and hardening, depending on weather.
Keep traffic off until fully set.
Inspect and Clean:
Verify thickness, adhesion, and alignment.
Remove stencils and clean equipment.
Tips:
Apply in dry, warm conditions (above 10°C).
Wear protective gear (gloves, masks) due to high temperatures.
Follow manufacturer instructions for equipment and material.

High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings 0

Technical Specification

MOQ:	1 ton
Price:	Pending
Standard Packaging:	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Delivery Period:	3-7work days
Payment Method:	L/C,T/T,Western Union
Supply Capacity:	100 tons per day

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

MOQ:	1 ton
Price:	Pending
Standard Packaging:	25kg per bag,40 bags per ton,25-28 tons per 1x20ft container
Delivery Period:	3-7work days
Payment Method:	L/C,T/T,Western Union
Supply Capacity:	100 tons per day

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

Thermoplastic Road Marking Paint

Thermoplastic Paint

JT/T280-2004

AASHTO M249

BS 3262

TCVN8791-2011

Road Marking Machine

Thermoplastic Kneader

Hand Push Thermoplastic Road Marking Machine

Cold Paint Road Marking Machine

Reflective Glass Beads

Two Component Road Marking Paint

Cold Road Marking Paint

Convex Mirror

Road Traffic Cone

Speed Bump

Road Stud

Other Traffic Safety Product

High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings

High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings

Thermoplastic Line Marking Paint,

Traffic Line Marking Paint,

Thermoplastic Road Marking Paint

Thermoplastic Paint

JT/T280-2004

AASHTO M249

BS 3262

TCVN8791-2011

Road Marking Machine

Thermoplastic Kneader

Hand Push Thermoplastic Road Marking Machine

Cold Paint Road Marking Machine

Reflective Glass Beads

Two Component Road Marking Paint

Cold Road Marking Paint

Convex Mirror

Road Traffic Cone

Speed Bump

Road Stud

Other Traffic Safety Product

High-Visibility and Skid-Resistant Thermoplastic Powder Paint for Safe Road Markings

Thermoplastic Line Marking Paint,

Traffic Line Marking Paint,